Emergency dispatch 24/7 Heating, cooling & plumbing across Will, DuPage & Kane counties and Chicago Book online
Byrds of a FeatherHVAC & Plumbing Services (779) 703-5705

Fall furnace checklist: what to do before the first cold snap

Heating4 min read

Quick answer

Change the filter, test the thermostat in Heat mode, clear vents and returns, check carbon monoxide alarms, and run the furnace for a full cycle before you need it. Book a professional tune-up in September or October, before the rush.

Why fall, not the first cold night

The first cold week in the Chicago area is when every furnace that sat idle all summer gets switched on at once. Problems that were hiding — a dirty flame sensor, a weak igniter, a clogged filter — show up all at the same time, and HVAC companies book out for days. A 20-minute check in September or early October moves those surprises onto your schedule.

The 6-step homeowner checklist

  1. Replace the filter. A clogged filter is the most common cause of short cycling and overheating. Most 1-inch filters need changing every 1 to 3 months during heating season.
  2. Test the thermostat. Switch to Heat, raise the setting 3 to 5 degrees above room temperature, and confirm the furnace starts within a few minutes. Replace thermostat batteries if it has them.
  3. Clear vents and returns. Move furniture, rugs, and boxes off supply registers and return grilles so air can move freely.
  4. Check carbon monoxide and smoke alarms. Press the test button and replace batteries. Illinois law requires working CO alarms within 15 feet of every sleeping room in homes with fuel-burning appliances.
  5. Look at the area around the furnace. Keep at least a few feet clear of storage, paint cans, and anything flammable.
  6. Run a full cycle. Let it heat for 15 minutes. A little dust smell the first time is normal. A burning plastic or electrical smell is not — shut it off and call.
Smell gas? Don't touch light switches or the thermostat. Leave the house and call 911 or your gas utility from outside.

What a professional fall visit adds

A tech checks what you can't safely reach: the burners and flame, the heat exchanger for cracks, the igniter and flame sensor, safety limit switches, gas pressure, and the flue and venting. See the full list in what an HVAC tune-up includes.

Signs to book now, not later

  • The furnace is 15 years old or older
  • Last winter it cycled on and off often, or some rooms never warmed up
  • Heating bills climbed without a change in how you use it
  • You hear banging, squealing, or rumbling when it starts

Our maintenance plan puts the fall visit on the calendar automatically.

Call nowBook online